Turbine Drive Hose Reel Traveler Irrigator T75-400

Water-saving and high-quality Hose reel traveler irrigation machine.



Turbine Drive Irrigator T75-400, power is transmitted from the turbine onto the reel over a 4-stage gearbox and a chain drive. The compact drive unit consists of a full-flow turbine. minimum pressure losses and maximum performance.  

  • Heavy-duty high-density polyethylene hard hose
  • PE hose length is 400m
  • Water Turbine control rewinding system speed
  • 4 Speed Gearbox, user-friendly gearbox, and turbine structure.
  • The chassis is turnable at 270° and the rotary chassis can easily be swiveled by one person into the desired working position.
  • Patent automatic alarm system and remote reminder users’ irrigation ending functions.
  • Adaptable to irregular fields, obstructions and undulating terrain
  • Equipped with a two-wheel sprinkler cart and cover wide-range spray gun.
  • We designed a twin guns sprinkler cart that got a patent in 2015.
  • The irrigators have high stability, reliability, and low maintenance, and an average service life of around 15 years.
  • Save water up to 75% or more, and increase crop production.
  • High efficiency, with one T75 single irrigator machine controlling up to 32~49 acres in one irrigation cycle
  • Can select Rain gun sprinkler types AA50, Extended Arm AA50, TV50
three-phase power and single-phase power for user choosing
Automatic alarming system, 380V three-phase power and 48V~60V single-phase power for user choosing


Type T75-400
Dimensions (LxWxH) mm 4950x2060x3070
Hose reel drum rewinding driving mode Water turbine 
rewinding speed control  Valve+ 4 speed gearbox + belt pulley
horizontal steering angle(°) 0~270°
numbers of hose layer 6
Hard hose material PE
PE-pipe dia. (mm) φ75
PE-pipe thickness (mm) 6.8
PE-pipe length  (m) 400
Gun sprinklers cart frame Gantry shape
driving mode Traction operation
wheels distance (mm) 1680~2000
Tyre inner diameter(inch) 10
clearance (mm) 1300
Rain Gun Sprinkler type Rotary  
quantity 1
model AA50, TV50. 
Pump flow (m3/h) 20~45
head (m) 78~104
power (KW) 9.2~18.5
Transport clearance (mm) 270
Tyre inner diameter(inch) 12

Please Note: We are ongoing effort to upgrade our products, which may bring some technical modifications during the production, therefore the technical specifications and features maybe subject to change without previous notice.


Important points

  • The first time you pull the PE hose out to start the irrigation, you have to pull it out compeletly leaving only 1 or 2 rings on the drum.
  • Before you rewind the PE hose, please be sure the gearbox lever is neutral position otherwise the gear box can be strongly damaged.
  • If the PE hose has been partially pulled out, probably some rings became loose on the drum and it’s necessary to pull it out compeletly to roll it up again so it will be all well tightened.
  • Sprinkler cart, only the tires together with the PE hose have to support the cart weight.

Transport irrigator safely

  • During the machine transport the max allowed speed is 10 km/h on flat roads.
  • The jack and both rear machine supports must be withdrawn to their uppermost position. The support legs must be secured with lock pins.
  • The PE-pipe must be fully wound up on the reel and the cart lifted.
  • The tractor pulls the sprinker car in working area, the trasport speed never exceed 5km/h.

Wind effect

  • The performance of a travelling irrigation machine can be greatly affected by wind, particularly when gun-type nozzles are used on high angle seetings.
  • Wind speeds greater than 3m/s can have significant effects on uniformity.


  • maitenance gearbox in 500 hours at first time, then need to mainten one time per year
  • maitenance reel transimission chains in 300 hours
  • maitenance reel rotary bearing, rotary bearing and all connecting bearings in 500 hours
  • Control peridically the tires pressure
  • Lubricate the sprinkler in every 400 hours 

irrigators store in winter

  • if the winter temperature will drop below freezing in the place that the machine will be strored, it’s better to partially empty the PE hose. use air compressor with air output 800L/min and pressure 0.25MPa, connecting air pressure with machine inlet water, then take off the water from PE hose.
  • Remove connecting soft hose, then drainage inside water of it. Keep the coiled soft hose in dry, well-ventilated and away from light place.
  • Store the cleared and lubricant irrigation in a sheltered place, not directly exposed.
  • Pay attention to the oil level of the gearbox window to ensure that the gear oil can be observed at the window. If not, fill gear oil to the oil window position.






Related Products

Product Categories

Need Consultation?

Share your idea, We’ll find solution for you within 24 hours

Inquiry Now

Share your idea, We’ll find solution for you within 12 hours.