Turbine Drive Irrigator T75-300, Power is transmitted from the turbine onto the reel over a 4-stagegearbox and a chain drive. The compact drive unit consists of a full-flow turbine. minimum pressure losses and maximum performance.
Heavy-duty density polyethylene hard hose
PE hose length is 300m
Water Turbine control rewinding system speed
4-speed gearbox, user-friendly gearbox, and turbine structure.
The chassis is turnable at 270° and the rotary chassis can easily be swiveled by one person into the desired working position.
Patent automatic alarm system and remote reminder users irrigation ending functions.
Adaptable to irregular fields, obstructions, and undulating terrain
The T series irrigator is equipped with a two-wheel sprinkler cart and covers a wide range spray gun.
We designed a twin guns sprinkler cart that got a patent in 2015.
The irrigators have high stability, reliability, low maintenance, average service life of 15 years
Save water up to 75% or more, and increase crop production.
High efficiency, with a single T75 irrigator machine controlling up to 32~49 acres in one irrigation season.
Can select Rain gun sprinkler types AA50, Extended Arm AA50, TV50
Dimensions (LxWxH) mm
Hose reel drum
rewinding driving mode
rewinding speed control
Valve+ 4 speed gearbox + belt pulley
horizontal steering angle(°)
numbers of hose layer
PE-pipe dia. (mm)
PE-pipe thickness (mm)
PE-pipe length (m)
Gun sprinklers cart
wheels distance (mm)
Tyre inner diameter(inch)
Rain Gun Sprinkler
AA50 TV50, etc.
Transport clearance （mm）
Tyre inner diameter(inch)
Please Note: We are ongoing effort to upgrade our products, which may bring some technical modifications during the production, therefore the technical specifications and features maybe subject to change without previous notice.
The first time you pull the PE hose out to start the irrigation, you have to pull it out compeletly leaving only 1 or 2 rings on the drum.
Before you rewind the PE hose, please be sure the gearbox lever is neutral position otherwise the gear box can be strongly damaged.
If the PE hose has been partially pulled out, probably some rings became loose on the drum and it’s necessary to pull it out compeletly to roll it up again so it will be all well tightened.
Sprinkler cart, only the tires together with the PE hose have to support the cart weight.
Transport irrigator safely
During the machine transport the max allowed speed is 10 km/h on flat roads.
The jack and both rear machine supports must be withdrawn to their uppermost position. The support legs must be secured with lock pins.
The PE-pipe must be fully wound up on the reel and the cart lifted.
The tractor pulls the sprinker car in working area, the trasport speed never exceed 5km/h.
The performance of a traveler irrigator can be greatly affected by wind, particularly when gun-type nozzles are used on high angle setings.
Wind speeds greater than 3m/s can have significant effects on uniformity.
maitenance gearbox in 500 hours at first time, then need to mainten one time per year
maitenance reel transimission chains in 300 hours
maitenance reel rotary bearing, rotary bearing and all connecting bearings in 500 hours
Control peridically the tires pressure
Lubricate the sprinkler in every 400 hours
irrigators store in winter
if the winter temperature will drop below freezing in the place that the machine will be strored, it’s better to partially empty the PE hose. use air compressor with air output 800L/min and pressure 0.25MPa, connecting air pressure with machine inlet water, then take off the water from PE hose.
Remove connecting soft hose, then drainage inside water of it. Keep the coiled soft hose in dry, well-ventilated and away from light place.
Store the cleared and lubricant irrigation in a sheltered place, not directly exposed.
Pay attention to the oil level of the gearbox window to ensure that the gear oil can be observed at the window. If not, fill gear oil to the oil window position.