TrusKa M75-300 is a universal irrigation machine designed and constructed for labor-saving irrigation of varying lengths and widths of fields with the greatest variety of crops, etc.
TrusKa Motor drive rewinding M75-300 irrigator is characterized by an extraordinary price-performance ratio and maximum irrigation efficiency.
Heavy-duty high density polyethylene hard hose
PE hose length is 300m
Microcomputer and touch screen control rewinding system speed
The chassis is turnable at 270° and the rotary chassis can easily be swiveled by one person into the desired working position.
Adaptable to irregular fields, obstructions, and undulating terrain
The M75 series irrigator is equipped with a two-wheel sprinkler cart and covers a wide-range spray gun.
We designed a twin guns sprinkler cart that got a patent in 2015. We can custom design upon your request.
Adopting high-quality agriculture rubber tires.
Heavy-duty sprinkler cart with adjustable wheel widths
Can select Rain gun sprinkler types AA50, Extended Arm AA50,TV50
Patent automatic alarm system and remote reminder users irrigation ending functions.
Specification
Type
M75-300
Dimensions (LxWxH) mm
4580x2060x2600
Hose reel drum
rewinding driving mode
Motor
rewinding speed control
Microcomputer and touch screen control
horizontal steering angle(°)
0～270°
numbers of hose layer
5
Hard hose
material
PE
PE-pipe dia. (mm)
φ75
PE-pipe thickness (mm)
6.8
PE-pipe length (m)
300
Gun sprinklers cart
frame
Gantry shape
driving mode
Traction operation
wheels distance (mm)
1550~2500
Tyre inner diameter(inch)
10
clearance (mm)
1200
Rain Gun Sprinkler
type
Rotary
quantity
1
model
AA50, TV50. etc.
Pump
flow (m3/h)
20～45
head (m)
78~104
power (KW）
9.2~18.5
Transport clearance （mm）
285
Tyre inner diameter(inch)
12
Please Note: We are ongoing effort to upgrade our products, which may bring some technical modifications during the production, therefore the technical specifications and features maybe subject to change without previous notice.
Reminder
Important points
The first time you pull the PE hose out to start the irrigation, you have to pull it out compeletly leaving only 1 or 2 rings on the drum.
Before you rewind the PE hose, please be sure the gearbox lever is neutral position otherwise the gear box can be strongly damaged.
If the PE hose has been partially pulled out, probably some rings became loose on the drum and it’s necessary to pull it out compeletly to roll it up again so it will be all well tightened.
Sprinkler cart, only the tires together with the PE hose have to support the cart weight.
Transport irrigator safely
During the machine transport the max allowed speed is 10 km/h on flat roads.
The jack and both rear machine supports must be withdrawn to their uppermost position. The support legs must be secured with lock pins.
The PE-pipe must be fully wound up on the reel and the cart lifted.
The tractor pulls the sprinker car in working area, the trasport speed never exceed 5km/h.
Wind effect
The performance of a travelling irrigation machine can be greatly affected by wind, particularly when gun-type nozzles are used on high angle seetings.
Wind speeds greater than 3m/s can have significant effects on uniformity.
Mantenance
maitenance gearbox in 500 hours at first time, then need to mainten one time per year
maitenance reel transimission chains in 300 hours
maitenance reel rotary bearing, rotary bearing and all connecting bearings in 500 hours
Control peridically the tires pressure
Lubricate the sprinkler in every 400 hours
irrigators store in winter
if the winter temperature will drop below freezing in the place that the machine will be strored, it’s better to partially empty the PE hose. use air compressor with air output 800L/min and pressure 0.25MPa, connecting air pressure with machine inlet water, then take off the water from PE hose.
Remove connecting soft hose, then drainage inside water of it. Keep the coiled soft hose in dry, well-ventilated and away from light place.
Store the cleared and lubricant irrigation in a sheltered place, not directly exposed.
Pay attention to the oil level of the gearbox window to ensure that the gear oil can be observed at the window. If not, fill gear oil to the oil window position.
